|
BlueSky Mast - BOLT ON KITS |
|
DESCRIPTION: The BlueSky Mast "Bolt On" Kits are used for mounting multiple devices on top of the BlueSky Standard Series Mast System. Each kit attaches to the mast by bolting on to the top of the 18 Inch Mounting Pole that is included with every BlueSky AL1 Standard Series II Mast System. Each Bolt On kit features removable arms that can be ordered in 5 different lengths as well as adjusted 180 degrees in 18 degree increments.
FOR USE WITH: BlueSky AL1 Standard Series Masts from 2 to 15 Meters (see BlueSky Mast Side Mounts listed below for additional attachments that can be used with removable side arms) |
 |
 | |
|
Mount - Bolt On - Kit - DUAL |
PICTURE |
DRAWING |
 |
|
KIT NUMBER |
|
Click PDF Symbol to Download
Click on Image to Enlarge |
|
6 INCH SIDE ARMS |
BSM2-K-A352-M06-000 |
|
12 INCH SIDE ARMS |
BSM2-K-A352-M12-000 |
|
24 INCH SIDE ARMS |
BSM2-K-A352-M24-000 |
|
36 INCH SIDE ARMS |
BSM2-K-A352-M36-000 |
|
48 INCH SIDE ARMS |
BSM2-K-A352-M48-000 |
|
Contents - Bolt On Dual Mount with 2 - Removable Side Arms, 2 Bolster Plates, Blackened Stainless Screws, Allen Wrench and Accessory Bag
(For Use with Standard BlueSky Mounting Pole) |
|
|
|
|
|
Mount - Bolt On - Kit - TRI |
PICTURE |
DRAWING |
|
|
KIT NUMBER |
|
Click PDF Symbol to Download
Click on Image to Enlarge |
|
6 INCH SIDE ARMS |
BSM2-K-A352-M06-000 |
|
12 INCH SIDE ARMS |
BSM2-K-A352-M12-000 |
|
24 INCH SIDE ARMS |
BSM2-K-A352-M24-000 |
|
36 INCH SIDE ARMS |
BSM2-K-A352-M36-000 |
|
48 INCH SIDE ARMS |
BSM2-K-A352-M48-000 |
|
Contents - Bolt On TRI Mount with 3 - Removable Side Arms, 3 Bolster Plates, Blackened Stainless Screws, Allen Wrench and Accessory Bag
(For Use with Standard BlueSky Mounting Pole) |
|
|
|
|
|
Mount - Bolt On - Kit - QUAD |
PICTURE |
DRAWING |
|
|
KIT NUMBER |
|
Click PDF Symbol to Download
Click on Image to Enlarge |
|
6 INCH SIDE ARMS |
BSM2-K-A352-M06-000 |
|
12 INCH SIDE ARMS |
BSM2-K-A352-M12-000 |
|
24 INCH SIDE ARMS |
BSM2-K-A352-M24-000 |
|
36 INCH SIDE ARMS |
BSM2-K-A352-M36-000 |
|
48 INCH SIDE ARMS |
BSM2-K-A352-M48-000 |
|
Contents - Bolt On QUAD Mount with 4 - Removable Side Arms, 4 Bolster Plates, Blackened Stainless Screws, Allen Wrench and Accessory Bag
(For Use with Standard BlueSky Mounting Pole) |
|
|
|
|
|
BlueSky Mast - COMPRESSION KITS |
|
DESCRIPTION: The BlueSky Mast "Compression" Kits are used for mounting multiple devices anywhere on the BlueSky Standard Mast System. The Compression Kits can be attached anywhere on the mast and even stacked for applications that require vertical separation between devices. Each Compression kit features removable arms that can be ordered in 5 different lengths as well as adjusted 180 degrees in 18 degree increments.
FOR USE WITH: BlueSky AL1 and AL2 Standard Series Masts from 2 to 15 Meters. (see BlueSky Mast Side Mounts listed below for additional attachments that can be used with removable side arms) |
 |
 | |
|
Mount - Compression - Kit - DUAL |
PICTURE |
DRAWING |
|
|
KIT NUMBER |
|
Click PDF Symbol to Download
Click on Image to Enlarge |
|
6 INCH SIDE ARMS |
BSM2-K-A352-C06-000 |
|
12 INCH SIDE ARMS |
BSM2-K-A352-C12-000 |
|
24 INCH SIDE ARMS |
BSM2-K-A352-C24-000 |
|
36 INCH SIDE ARMS |
BSM2-K-A352-C36-000 |
|
48 INCH SIDE ARMS |
BSM2-K-A352-C48-000 |
|
Contents - Dual Compression Collar with 2 - Removable Side Arms, 2 Bolster Plates and Accessory Bag
(Can be Attached Anywhere on the BlueSky Mast) |
|
|
|
|
|
Mount - Compression - Kit - TRI |
PICTURE |
DRAWING |
|
|
KIT NUMBER |
|
Click PDF Symbol to Download
Click on Image to Enlarge |
|
6 INCH SIDE ARMS |
BSM2-K-A352-C06-000 |
|
12 INCH SIDE ARMS |
BSM2-K-A352-C12-000 |
|
24 INCH SIDE ARMS |
BSM2-K-A352-C24-000 |
|
36 INCH SIDE ARMS |
BSM2-K-A352-C36-000 |
|
48 INCH SIDE ARMS |
BSM2-K-A352-C48-000 |
|
Contents - TRI Compression Collar with 3 - Removable Side Arms, 3 Bolster Plates and Accessory Bag
(Can be Attached Anywhere on the BlueSky Mast) |
|
|
|
|
|
Mount - Compression - Kit - QUAD |
PICTURE |
DRAWING |
|
|
KIT NUMBER |
|
Click PDF Symbol to Download
Click on Image to Enlarge |
|
6 INCH SIDE ARMS |
BSM2-K-A352-C06-000 |
|
12 INCH SIDE ARMS |
BSM2-K-A352-C12-000 |
|
24 INCH SIDE ARMS |
BSM2-K-A352-C24-000 |
|
36 INCH SIDE ARMS |
BSM2-K-A352-C36-000 |
|
48 INCH SIDE ARMS |
BSM2-K-A352-C48-000 |
|
Contents - QUAD Compression Collar with 4 - Removable Side Arms, 4 Bolster Plates and Accessory Bag
(Can be Attached Anywhere on the BlueSky Mast) |
|
|
|
|
|
BlueSky Mast - SIDE MOUNTS |
|
DESCRIPTION: BlueSky Mast SIDE MOUNTS are for use with the removable side arms that come standard with all BlueSky Bolt On Kits, BlueSky Compression Kits and BlueSky AL1 and AL2 Winching Series Mast. Each Side Mount attaches to any removable side arm by utilizing a Stainless Steel Push Pin for quick and easy deployment.
FOR USE WITH: BlueSky Mast Bolt On Kits, BlueSky Mast Compression Kits, BlueSky AL1 and AL2 Winching Series Mast |
 |
 | |
|
Mount - Side - BOLTSTER PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-P-A101-BOL-EM0 |
|
Description - The BlueSky Mast Boltster Plate comes standard with all BlueSky Mast Bolt On Kits, Compression Kits and BlueSky AL1 and AL2 Winching Series Mast. It can be mounted both vertically or horizontally on the end of the removable side arm and can be adjusted 180 degrees in 18 degree increments. It features a slotted pattern for use with most U-Bolts as well as 2 N-Type slots. |
|
|
|
|
|
Mount - Side - ADJUSTABLE CUP HOLDER |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-P-A100-CUP-EM0 |
|
Description - The BlueSky Mast Adjustable Cup Holder can be mounted both vertically or horizontally on the end of the removable side arm and can be adjusted 180 degrees in 18 degree increments. It features an opening that can accept 1.25 Inch up to 2 Inch OD section tubing, with a slot cut in the bottom for cable as well as a Stainless Steel Turn Knob for securing the contents. |
|
|
|
|
|
Mount - Side - NATO PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-P-M305-NTO-EM0 |
|
Description - The BlueSky Mast NATO Plate Side Mount can be mounted both vertically or horizontally on the end of the removable side arm. It has 3 NATO pattern holes for use with typical vehicle mount antennas that can now be utilized on the mast, especially good for repeater type applications |
|
|
|
|
|
Mount - Side - CROSS PATTERN PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-P-M408-MPP-EM0 |
|
Description - The BlueSky Mast Cross Pattern Plate Side Mount was designed to give the customer flexibilty by accommodating a large variety of bolt hole patterns and can be mounted both horizontally as well as vertically depending on the application requirement. |
|
|
|
|
|
Mount - Side - CISCO PLATE 10 x 4.5 INCH |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-A-M410-CSC-EM0 |
|
Description - The BlueSky Mast Cisco Plate Side Mount was designed with CISCO Govt. Services to enable deployment of the Cisco Aironet 1500 Series Mesh Access Point. |
|
|
|
|
|
Mount - Side - HF PULLEY KIT |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-K-P500-PUL-EM0 |
|
Description - The BlueSky Mast HF Pulley Kit is used for raising and lowering HF inverted V-Antennas and features a Stainless Pulley with 95 Ft. of Non-Stretch UV Resistant Spectra Cord, Stainless Blackened Clip and Securing Kleat.
|
|
|
|
|
|
Mount - Side - 2 INCH POLE KIT |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-K-A200-POL-EM0 |
|
Description - The BlueSky Mast 2 Inch Pole Kit is used for attaching antennas and devices that require a 2 Inch OD Pole, includes a 12 Inch Piece of 2 Inch Outside Diameter Blackened Aluminum Tubing with Blackened Stainless Steel U-Bolts for attaching to BlueSky Boltster Plate. |
|
|
|
|
|
Mount - Side - 1.25 INCH POLE KIT |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-K-A125-POL-EM0 |
|
Description - The BlueSky Mast 1.25 Inch Pole Kit is used for attaching antennas and devices that require a 1.25 Inch OD Pole, includes a 12 Inch Piece of 1.25 Inch Outside Diameter Blackened Aluminum Tubing with Blackened Stainless Steel U-Bolts for attaching to BlueSky Boltster Plate. |
|
|
|
|
|
Mount - Side - FREEDOM PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
Not Available |
|
|
BSM2-P-M407-F4W-EMO |
|
Description - The BlueSky Mast Freedom Plate Side Mount can be mounted both vertically or horizontally on the end of the removable side arm and can be adjusted 180 degrees in 18 degree increments. |
|
|
|
|
|
Mount - Side - 7.5 x 7.5 INCH SOLID PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-A-M407-MPP-EM0 |
|
Description - The BlueSky Mast 7.5 x 7.5 Inch Solid Plate Side Mount was designed to allow customers easily to modify to their needs and can be mounted both horizontally or vertically depending on the required application and is made of 6061 Aluminum. |
|
|
|
|
|
Mount - Side - 11.5 x 11.5 INCH SOLID PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
|
|
|
BSM2-A-M411-MPP-EM0 |
|
Description - The BlueSky Mast 11.5 x 11.5 Inch Solid Plate Side Mount was designed to allow customers easily to modify to their needs and can be mounted both horizontally or vertically depending on the required application. |
|
|
|
|
|
Mount - Side - RADIO PLATE 5 x 5 INCH |
PICTURE |
DRAWING |
|
|
PART NUMBER |
Not Available |
|
|
BSM2-P-M405-MPP-EM0 |
|
Description - The BlueSky Mast Radio Plate Side Mount was designed to fit a small transceiver and can be mounted both horizontally or vertically depending on the required application. |
|
|
|
|
|
Mount - Side - CUSTOM PLATE |
PICTURE |
DRAWING |
|
|
PART NUMBER |
Not Available |
|
|
N/A |
|
Description - BlueSky's Design Team can work with your staff to help develop Custom Side Mounts that will fit your equipment needs for a ease of use and reduced deployment time.
|
|
|
|
|
|
|
|
|
